Repair the Power Button on iPhone SE
If you have a problem- iPhone SE power button not working, there are some tricks that may be useful the fix the issue. This guide covers a lot of the methods to diagnose and work around this issue.
Hard Reset Your iPhone
To start off, you can hard reset. This can fix any sorts of temporary software glitches that might cause the power button problem in our case. For which, keep pressing both the Power button and Home button together until you see the Apple logo (takes about 10 seconds). Now reboot your iPhone and see if the power button is now working properly.
Check For Physical Obstacles
The power button might not be functioning properly due to physical obstructions. Make sure that the case of your iPhone is not coming in between pressing the button. In some cases, Casing being badly molded or damaged causes a stress on the button. Take the case off (if there is one) and inspect the port’s opening: If anything at all is blocking it, removing a case will fix this.
Also check the area around the power button for dirt. Build-up of dust can limit functionSELECT YOUR MODEL Simply wiping around button area with any soft cloth soaked in rubbing alcohol will clear out all clogs.
Utilize AssistiveTouch
If the power button ends up not working, you could always enable AssistiveTouch as a temp fix. This helps in controlling device without buttons working upon a feature. Now go setting >
Accessibility accessibility > Touch, and switch on AssistiveTouch.iPhone Power Button Fix (ad) Once you disable it, you will be able to lock your device or reboot without hitting the power button.
Software Solutions
It also could be that some software problems are affecting the power button behavior. Rebooting your device in settings will allow the system software to breathe properly Head to Settings > General > Shut Down, then swipe the ‘slide to power off’ slider. Wait for another while and then restart it by plugging it (if needed) into a charger. 3.
If none of these solutions work, then you can reset all settings on your iPhone as a last ditch effort before calling in the experts. Settings > General > Transfer or Reset iPhone > Reset All Settings3.
Seek Professional Help
Worst-case scenario: there is a hardware problem that needs to be fixed by professionals. Contact Apple Support, or take him to a technician of an affiliated service.
