How to Diagnose Strobe Light Failures: A Comprehensive Guide If your strobe lights are not working, there are multiple steps you can take in order to diagnose the problem. A methodical way of troubleshooting goes as follows.
Check the Circuit Breaker
First thing first make sure it is not for the strobe lights breaker that you are checking. If it is tripped, reset it and try those lights again. Guess what, this is a basic which can take care of many small problems related with electricity.
Test the Voltage at the Power Supply
Now measure the voltage at input of power supply, if circuit breaker is working. Make sure it is getting power. If no voltage, check for upstream interconnects or switches.
Inspect the Flash Tube
Check the flash tube for any visible damage if there is powernotEmpty Search for blacking or cracks, which can have tube replaced A blocked tube is usually a cause for concern.
Swap Components for Testing
If you have any spare parts available (another flash unit, or power supply from another wingtip), swap it out to see if the problem stays on the original position. This could help to identify with component having problem.
Check for Ground Issues
Check for loose ground connections So a loose ground might be able to funkify the strobe lights or prevent them from working at all.
Evaluate Power Supply Health
Keep in mind that over time, the capacitors inside the power supply may deteriorate, this occurs most often if the system has been off for long periods. If you have this suspicion, it may require the unit to be repaired.strobe lights troubleshooting (ad)
Check Manufacturer Resources
Please refer to your strobe system manufacturer provided Troubleshooting Guides. These typically include individual directions for your car.
Step by StepOnce you are clear how a strobe light operates it becomes possible to diagnose the issue and possibly fix your non-on strobe lights.
