Breaking News

How to Replace Asphalt Shingles: A Step-by-Step Guide

This post may contain affiliate links.As an Amazon Associate I earn from qualifying purchases.

Related: 12 Signs That You Still Need a New Roof How to Replace Asphalt Shingles Replacing asphalt shingles is one of those home improvement projects that may require help from a pro, but few homeowners realize they can handle the task on their own. This is a more articulated and detail version, makes things clear and effective.

How to Replace Asphalt Shingles

Open the Marked Patch of Shingle

Insert a putty knife under one of the shingles and pry up, breaking the asphalt adhesive that secures the shingle. This step is important because it gives you access to the nails anchoring the shingle.

Break Adjacent Seals

Now that everything is ready: gently lift the shingles immediately above and beside the target shingle to break their seals as well. In this way, you will be able to save ruin of the neighboring shingles when removing.

Remove the Nails

Use a flat pry bar to remove the nails that secure the problem shingle back in place using its upper neighbor. Do this carefully, so that you do not tear the adjacent shingles in the process.

Remove Adjacent Nails

If needed, remove nails in nearby shingles that might obstruct the target one from coming off.

Out with the Old Shingle

After all seals are lifted, and the nails removed, gently pull the old shingle out of place. Make sure there is no leftover debris inside that can affect the new install.

In with the New Shingle

Insert the new shingle into its proper place, making sure that it lines up with existing ones. Nail it down with roofing nails, usually in positions where they will be hidden by the overlapping shingles.

Reseal the Shingles

Then press down the new shingle and secure it in place in order to build a strong seal using roofing cement under the tabs. This will avoid any leaks and make the wind resistance higher.asphalt roofing (ad)

Additional Considerations:

Materials will not stick well in wet conditions so make sure you complete your project on a dry day.

You should wear protection like gloves and non-slip footwear.

If you are not completely comfortable doing this yourself, you may want to consider having a professional do it.

By doing these steps, you can help in properly replacing the damaged asphalt shingles increasing your roofing system’s lifespan and keeping its protective abilities.

Leave a Reply

Your email address will not be published. Required fields are marked *