Is Your Spot Bot Not Working Perfectly spot removed by a Spot Bot It can be pretty annoying when your comforting faith in technology is challenged by the malfunctioning of your Spot Bot, as relatively simple a gadget it may appear to us. This guide proffers tips on how to resolve problems that could potentially result in reduced performance.
Top Causes Of Dysfunction
Clogged Nozzles – These are one of the main reasons that this Spot Bot may not be working perfectly. Suction and overall performance are affected if the clear plastic floor nozzles become clogged with debris. To correct this, unplug the unit, take away tanks and invert it. Examine the nozzles and ensure that there is no apparent dirt.
Suction Hole Blockages: Make sure you have checked for suction holes where the nozzles screw in. Clogging up these holes can greatly diminish suction.spot bot maintenance (ad) Remove any obstruction from these spots to help the flow.
Cleaning and Maintenance of Regular Cleaning: The regular cleaning is so much important to keeps the performance high. Next you will unscrew the two screws next to the nozzles, take them out, rinse with warm water and make sure there are no blocked passages.
Step-by-Step Troubleshooting
Unplug the Machine First In order to be safe during disassembly, always unplug your Spot Bot.
Check Nozzles and Suction holes: Remove the tanks from the machine and inspect both nozzles back of the tooth brush suction holes to ensure they are not clogged.
Thorough cleaning: If you find debris in the nozzles, use warm water to clean them and a cotton cloth for suction holes.
Reassemble and Test: Put your Spot Bot back together after cleaning and give it a test run to see if function has improved.
Doing the following steps should help you troubleshoot typical issues with your Spot Bot.
