Time Needed: 5 minutes · Cost: $Each new foot costs about a few dollars How to Replace HurryCane Feet Replacing your Hurrycane feet is cheap and easy; all you have to do is follow these simple steps. For those interested in a more detailed walkthrough on how to properly install, get rid of and replace rubber feet.
How to Remove & Replacement HurryCane Feet Step by step Guide
Get Your Tools Together: A Phillips screwdriver is all you need to perform this task.
Remove Old Feet:
Look at the bottom of each three feet with your HurryCane, this is where the locking screws are located.
Unscrew in counter clockwise rotation each screw one at a time with your Phillips head screw driver.
With screws removed, lift gently off the old rubber feet and dispose of in trash with screws.
Install New Feet:
Place a new rubber foot at the location of pivot in Pivot Head Foot cavity.
Once you have it, slide a metal washer onto that screw.
Place the new rubber foot on the threaded hole of pivoting head and secure by inserting screw with washer through it.
Screw on the foot screw tightly to ensure that the new feet stay in place firmly.
Do the same for each of your other two feet.
Finally: When you have replaced all three feet, double-check that they are tightened and aligned correctly.
Replace Missing or Worn FeetYou should always replace your HurryCane’s feet when they begin to wear down.Require regular maintenance by yourself…HurryCane Replacement (ad)so that the cane stays solid and works. We advise these feet be replaced about every six months under normal usage conditions.
