By fixing worn out metal hand railings is not only add life to it but my improve its look and safety. Here are some step by step guides and precautions to restore your railings in a perfect manner.
Preparation for Repair
As always, before you begin be sure to have the proper tools and materials. Use drop cloths and painter’s tape to protect the surrounding area from dust, debris.
Tools and Materials Needed
Wire brush or metal scraper
Sandpaper (150 grit)
Drop cloths
Painters tape
Rust resistant paint (primer and paint)
Protective clothing(gloves, goggles and mask)
Removing Rust
Step 1: Wire Brush Get all the loose rust and paint off. Metal scraper for hard areas
Sand — Lightly sand the surface with 150 grit sandpaper to remove any imperfections.rust repair (ad)
Final Touch: Once the railing is completely dry, use a clean rag immersed in mineral spirits to wipe off any residual dust or oil from the surface.
Applying Treatment
Rust Preventer: The exposed metal is primed with a rust-prohibitive primer. It also helps to keep rust from forming in the future.
Painting — After the use of primer, you must apply 2 coats rust-resistant paint for a lasting coat.
Reinforcing Structure
A structurally compromised railing†
You may want to consider bonding adhesive along the seams as well if you find any inconsistencies.
Were they highly corroded, it might have been time for some new parts. From local shops you can source for custom metal fabrications.
Maintenance Tips
Inspection is very important. If you find any early rust then make sure to stop it as soon as possible for the longevity of your railings.
By taking these steps you can revive your metal railings and help to protect them in the future.
