Guide to Restoring Worn Veneer:Step by Step Guide To Reducing Old Furniture New Life With A Wonderful Service To help you, here is a step-by-step guide on the correct way to refinish veneer furniture preserving its grace and existence.
Veneer Condition Evaluation
Take stock of the state your veneers are in before you initiate a restoration. Check for PeelingThe veneer may peel due to water or moisture getting in between the surface on which it is applied Look out for scratches and places where you can see that part of the fake wood layer is coming off. “We have the guy going out checking things on site and then we come up with an original scope — if this work is taken in-house, what needs to be addressed or repaired etc.
Preparation Steps
Cleaning the Surface
Clean the VeneerUse a damp cloth to clean dust and grime off of your veneer. This step is important because it prevents the dirt from getting embedded into your new finish. In case you need to, use a mild detergent and then dry them carefully with no water left.
Removing Hardware
Remove all the hardware, i.e. handles, drawers and legs This makes for a complete sanding/finish without any obstructions.
Sanding Process
Initial Sanding
Gently sand the entirety of the veneer with your 100-grit sand paper You also want to focus on removing the old stain and finish without sanding deeply enough that you expose and damage the overall veneer layer. If it feels likes its getting some resistance or not cutting in the way you want, switch back to heavier grit ( like 80) until everything is smooth enough for finer sand.
Dust Removal
Vacuum the piece with a soft brush attachment to remove any dust and debris after sanding. Next, use a tack cloth to collect any dust that might ruin your finish.
Addressing Imperfections
For deeper gouges or marks, use a more fine-grit sandpaper (between 120 grit and upward), to even out those areas sparingly.veneer restoration (ad) Sanding with the grain of wood will always keep a more even look.
Finishing Touches
Staining and Sealing
When the sanding is complete, select a stain to match your style. Before using it, test a non-visible area to make sure that you like how the color came out. Spread it all over the wood with a brush or cloth, making sure you get it in everything nook and cranny that you need stained.
When staining or well after it has dried, use a protective topcoat like polyurethane (my preference) varnish to protect the wood from daily life. If you follow the manufacturers recommendations when it comes to drying times between coats, they will look like new and nothing will show through.
Final Assembly
After everything has dried, put back on any of the original hardware that was taken off at first. Now your updated, refinished wood veneer furniture is ready to be displayed in your home!
With these steps you can restore the much worn veneer furniture to life and keep it as close to its original potential.
