Published by Adam Michael When repairing a ceiling, the last thing you want is a trade mark line running down it. The following are broad steps, and thoughts to be considered during the decision-making process:
Damage Appraisal and Preparation
It is very essential to check the damages before starting with repairs. Pinpoint all affected areas, and decide if the damage is a result of water leaks or structural issues— or both from general wear. The material in the ceiling should be clean and dry, free of loose or worn out materials. For new materials to properly adhere, this is a crucial step.
Filling Holes and Cracks
Use filler and take care of the holes once all damaged areas are cleared. Otherwise, score around them with a utility knife so that they are not harmed at the time of repair. Smear it over the crack with a putty knife, feathering out the edges so they blend into your wall. For bigger holes, you can cut a patch of complementary drywall and then either screw it on or stick in the hole.
Wrap-Up and the Fun Stuff
Once filled, the repaired sections are to be covered with joint tape to paper over in order not crack. Spread joint compound over the tape so that you can gradually blend it into the current ceiling. When it is dry, sand the area to smooth. Finish with a coat of primer and paint to match the rest of your ceiling, and any leak or other water damage will be put behind you.
Additional Considerations
Safety Ideas: Wear goggles, and a mask when you are working overhead.
If it does, then you might want to consider reapplying the texture following your paint coats.
Control Humidity: Keep the humidity in your workspace under control, so that joint compounds are dried evenly.
Using these simple step by steps you can learn how to properly repair your ceiling all the while make it look good as new.
