Repairing a cutting torch requires certain steps be taken to make it work as effectively as possible. For those common problems, here is a detailed guide for handling them.
Check the Torch Point for Obstructions
The very first thing to do is to look at the torch tip, if ports are plugged this will have a huge affect on operation. If you see any milf scale or remnants of metal making build-up, clean the tip with a wire brush. This is extremely important as clogging can prevent gas from flowing, creating a very unstable flame.
Check for Damage
Replace the tip of the torch, which is warped or flattened Not only does a broken tip dull more quickly, but it can also create unsafe working conditions. Make sure the replacement tip will work with your model of torch.
Clean Internal Components
Clean the inside of those port holes with a torch tip cleaning tool. It is made to clear away any debris that can restrict the flow of gas.cutting torch repair (ad) Maintaining the inside of these components will help consume less battery and allow your torch to last longer as well.
Adjust Gas and Oxygen Levels
Make sure all gas and oxygen levels on your torch is clean after cleaning. Modify as needed to get the perfect mix for cutting. A mixture in balance will create a stable flame and is necessary for proper cutting of this type.
Reassemble and Test
Put it all back togetherJust reassemble the torch, once everything has been cleaned and inspected. Test it out to make sure everything works fine before using extensively. Try to match the flame stability and adjust accordingly.
These steps above should help you in troubleshooting and fixing your cutting torch to enable it function optimally.
