Secure the nut with an appropriately sized wrench and then screw back any light bulbs you had removed before finally testing your chain — pull on it to see if the fix worked gently.
How to Fix a Pull Chain Output
Turn Off the Power
First and foremost make sure everyone is safe. Find the circuit breaker that goes to your light fixture and shut it off so you can install a pvs cap with no electrical hazard.
Unscrew the light bulbs and cover fixtures.
Remove the light bulb then you eliminate all risk of electric shock. First, remove any decorative covers or accessories that may be obscuring access to the fixture.
Disconnect Wiring
Unscrew the fixture from the electrical box carefully. Without touching any of the exposed wires, tug it down gently. Test the wires to ensure there is no power using a voltage tester.pull chain repair (ad)
Putting in a New Switch and Chain
In many cases, if the pull chain breaks or becomes stuck it is often easier to just replace the entire fixture than replace only the switch. Loosen the terminal screws and remove the wires from your old fixture to disconnect it.
Attach New Fixture
Your new pull chain fixture should be wired by clicking in the black and white wire to, respectively, gold terminal (black) and silver terminal. Verify the connection and wire ends are stripped appropriately to allow a good fit.
Attach Covers and Accessories to the Camera
After you connect everything, gently return excess wiring back into the electrical box and secure the fixture. Put back any covers or decorative elements you took off.
Reinsert Light Bulb
Now, go ahead and screw in the light bulb back on AND make sure that it is properly fastened before turning power on.
Turn On Power
Now return to your home’s circuit breaker and re-energize the power supply. You’ll want to test your new pull chain and make sure it works as intended.
Tips for Maintenance
Check your pull chain for wear, and do so regularly.
Do not exert excessive force on the chain, or else risk future breakage.
If you find that with frequent use then consider using a pull chain adapter for easy replacement.
These simple steps can help you easily repair a stuck or damaged pull chain in your ceiling light, which would allow the latter to work as effectively and safely inside of your home.
