Best Ways to Clean Yellowed Plastic Solar Lights Cleaning yellowing plastic on solar lights keeps your landscape shining. So today I am going to share a step-by-step guide on exactly how you can remove discoloration.
Basic Cleaning Steps
Step 1: Take Off the CoverRemoving_cover To clean the surface just shake out debris, like dead insets.
Clean with Soapy Water: Warm water mixed with a few drops of dish soap should do the trick. Use this solution to clean up the dust and dirt over plastic. A wonderful and effective way gently maintaining your dreadlocks on a regular basis1
Vinegar Solution
Oxidation: To remove oxidation another solution was created using a combination of white vinegar, and water in equal portions. Soak these in the paste and rub it into all of where there is yellow; acid helps to break down oxidation, which can cause things to yellow15. Apply directly on jackets (just make sure only exposed canvas/suede), as you don’t want baking soda dust settling inside your shoes24.
Scrub: Gently scrub with a soft cloth or a toothbrush, careful not to damage the plastic. This guide will show you how to take it apart, rinse it thoroughly and let is dry before putting the light1 back together.
Toothpaste Technique
Buffing with Toothpaste: This is a no fuss method that uses regular tooth paste. Use a cotton ball to apply it, and then buff the surface before rinsing away. This may particular help it become less difficult see when the yellowing is light-weight34.
High-Level Recovery Strategies
If the discoloration is worse, you may want to go with WET-SANDING and some fine grit sandpaper (400-2000).clean solar lights (ad) It is important to keep the surface wet when sanding in order not to create scratches. Polish on with an auto polishing compound for that glassy finish26.
Clear Coat: A clear coat can be applied after cleaning to provide additional UV protection and safeguard the plastic against further yellowing.
All these solutions do not only make solar lights look good again but they will also improve its performance by keeping the panels clean and free of dust, oxidation etc.
