The Right Way to Clean Motorcycle Cooling Fins
Regular Cleaning The Fins Of A Motorcycle Well known thing that can be done, or at the most usual time intervals is to clean up your cooling fins of a motorcycle. So, a full guide detailing the various ways on how to clean aluminum fins in our home.
Preparation Steps
Proper Location: After you have a suitable spot, park the bike in direct shade to ensure that sunlight does not dry out the solution prematurely.
Materials: You will need — ∙
A clean bucket
Warm water
Grease-cutting dish soap
Gentle brush (toothbrush or modest kitchen area brushes),
Optional: Aluminum polish or some other engine cleaner
Cleaning Process
First Rinse: Flush the AC coil gently with a low-pressure stream of water to rinse debris and dirt from the cooling fins using dresses. DO YOUR BEST TO REMAIN ON THE AIR BOX OR INLET SIDE OF THE AIR CLEANER19, 20
Apply Soapy Solution: Fill a bucket with warm water and add several squirts of grease-cutting dish soap. Use a brush dipped in the solution to scrub the cooling fins lightly, concentrating on more soiled areas of buildup.
When Need Be: If your cleaning solutions still left behind tough stains or discoloration, you may want to take fine sandshpaper (then aluminum polish) to scrub the spots. This helps in regaining the lustre and also prohibiting discoloration23.motorcycle maintenance (ad)
Finish Rinse: When you are finished scrubbing, rinse the area thoroughly with fresh water to remove any soap residue.
Post-Cleaning Care
Dry: Leave the engine to dry in fresh air completely, devoid of any moisture — preferably an exotic position without much weathering as it can result into rust.
Pavan stated: “Coolant Exploded on Me but My Suit Wasnt Stained So, Initially I Assumed It was Water-based17 Our Clean-up Process for the Radiator Fluid is OMS (Our Magic Stuff) Because We Cant Say Its WD-40!!!!” After deep cleaning we applied a silicone spray as this will provide some resistance to dirt and other grime when Pawan takes-off next month68.
Additional Tips
Basically, the cooling fins should be cleaned every few months or after riding in really dirty conditions for proper maintenance.
Try using foaming oven cleaners for getting rid of stubborn stains, and always test on aluminum surfaces first46.
That way the cooling fins of your motorcycle will be able to do their work, helping reduce overheating issues and prolonging engine lifespan.
