If your igniter isn’t clicking – The common issues and fixes Ultimately, if you have an issue with the igniter failing to click then may touch base on potential causes based upon my research conducting airborne operations in Afghanistan. By all means, some cracks are going to need more than others but… CHAPTERS SPANNER Here are a few showcases.
Igniter Mechanism Issues
No Click Sound: If the igniter does not click when you try to operate it, it might signify a defective switch or an ignition module. The switch may be bad, or the appliance is not getting any power13.
Wires from igniter to power source may be loose or damaged.igniter issues (ad) If a wire is broken, the igniter may not click25.
Environmental Factors
If the igniter has been exposed to moisture, not click or spark(2) After cleaning, this often happens; just make sure the igniter is perfectly dry before you try it out again35.
Obstruction Due to Debris and Clog: a food piece or even just any sort of grease can come create an obstruction in between the ignition process A dirty burner and any other debris issues can also lead to troubleshooting ignition problems16.
Component Failures
Igniter Module Failure: If you ensured there is power to the module and it was clean but still did not hear any clicking, then your igniters actually be bad instead require replacing24
Battery: Make sure the battery is properly inserted and that it has charge in case you are using a battery-operated igniter. 56 Click or spark but do not stay lit Dead battery → No click/spark
So, to recap: if your igniter won’t click (click!— nothing),trace all possible electrical and environmental causes for the ignition failure as well any component failures. Solving these problems could be the solution to get your igniter working again.
