How to Have Universal Washer Timer Failures Washers are not so advanced that they could do their cycles with a computer board. If the timer does not move on, it can disrupt the entire cycle of moving parts. Some reasons for the blockage and derangement of timer are as follows:
Defective Timer Motor
Time Motor (displayed at AUTO): The timer motor will click into place in order to advance the timer through its cycles.washer timer issues (ad) In case of the motor becoming faulty, it may not get to work properly preventing the timer from moving ahead. Repairing a timer motor is usually very difficult and expensive12; nine times out of ten, this issue will need to replaced rather than repaired.
Stuck Control Contacts
All timers have control contacts that close to enable power to the load and open again when it is time for the timer circuit board to stop supplying current. It is these contacts that signal the machine to move from one stage to another, so this situation may prevent it from finishing its cycles properly. There should not be any beadigerants in the system, so testing for contunity with a multimeter will tell you if this is your issue14.
Drive Gear Damage
Drive gears can wear down, or in some rare cases become damaged from use spinning the mechanical components of the timer. Since these cogs are just always spinning anthing but gears properly working can cause weird noises or not engage, resulting in timer13 malfunction.
More trouble Shooting Steps
In order to determine a defective timer, you must unplug the appliance and measure continuity across the motor contacts using an authorized voltage meter. If there is no continuity between the two, it means either of the motor or contacts needs to be replaced. In addition, inspect the wiring harness for any breaks or damage since this may result in some performance issues with timer25.
Thus, these facts might help you to do better troubleshooting in your washing machines. Similarly, regular inspections and replacements can as well be a lifespan guarantee for your appliance to run smoothly.