How To Fix: A DIY iPhone 5s Power Button Replacement Guide
Do you have any problem with your iPhone 5s power button that is stuck or not working? RelatedSave 50% on Our Best Thermal Paste FeaturedHow to Install an Oversized Heatsink and Avoid ESD DamageGently insert the screwdriver beneath a corner of each pull-tab until it separates from the adhesive. We’ll take you step by step through the process of repairing your iPhone 5s power button, from disassembly to reassembly.
Tools You’ll Need
Prepare tools you’ll need for the following steps:
Pentalobe screwdriver
Phillips screwdriver
Suction cup
Spudger or soft/hard plastic opening tool
Tweezers
Step-by-Step Repair Process
1. Turn off your iPhone 5s and take out the SIM card.
2. Take out the two pentalobe screws at the bottom of your iPhone with a Pentalobe screwdriver.
3. Lift the screen assembly carefully by the suction cup. Careful not to tear the home button ribbon underneath.
4. Remove the battery after disconnecting its connector.
5. Disconnect the dock connector assembly and remove logic board.
6. Find the plastic button that turns on your TV and push it inside the frame carefully using a guitar pick or blade. Make sure you don’t tear the cable underneath.
7. Take out the power switch and look at that one metal contact spacer. If it is defective, replace the complete power button unit.
8. Follow these same steps exactly in reverse order to reassemble your iPhone.
Step #9 – Test Your Power Button修理した電源ボタンのテスト
Finalized the AssemblyProcess, Now Test Your power button by:
Repeatedly locking and unlocking your iPhone
Keeping the power button depressed until you see Slide to Power Off.
Holding the power and home buttons for a force restart
If all is properly combined, congrats! And you’re done repairing your iPhone 5s power key.
Keep in mind, if you are unsure about attempting a repair on your own it is always best to consult an expert.
