Do You Need a PEX Clamp Tool? To set the scene, one of the essentials you really need to get right when working with PEX tubing is determining whether or not a PEX clamp tool will be needed for making secure connections. Wanna consider some perspectives?
Connection Types and Tools
They may have crimp or clamp down PEX connections. Although these methods can both use the same fittings, they will need separate tools. Crimp connections rely on crimp rings and a crimper, while clamp connections require an actual clamping tool created for this specific application. The sole reason for caring about the distinction of PEX sizes is that if your job spec will have you crimping different diameters, then each diameter size requires a seperate tool to be carried in your toolkit.
Versatility of Clamp Tools
One of the primary benefits in using a PEX clamp tool is versatility. A single clamp tool can replace multiple jaw sizes used on crimp tools for different diameters, and standard pinch clamps work with more than one size fitting (normally 3/8-inch to a full inch). Rather than having to break out another tool, this feature makes the job a bit easier especially in spaces where there isn’t much room and using more tools makes it harder24.
Calibration and Reliability
To make good connections, you need to ensure that your PEX clamp tool is properly calibrated. For tools like the SharkBite PEX clamp tool, this means that you have a calibration gauge to make sure your connections are secure without having additional (not usually provided) Go/No-Go gauges after every use. Reduced failure to connect during installation25 If the connection is established, this has guaranteed it and could simply skip over.PEX Clamp Tool (ad)
So, in short — You may not be able to find a requirement for PEX Clamp Tool at every project but owing it offers so many additional benefits that you should have them added into your plumbing toolkit especially when multiple sizes of PEX Tubing can come handy with the tool.
