Best Practices to Fix a Faulty SSD If it comes down to the ugly situation of an actual faulty solid state drive, there are several recovery methods you can use for restoring operation and saving your data. Below is a detailed introduction of the top approaches:
Formatting the Drive
Reformat Your SSD: If the issue is related to file system errors, bad sectors or fragmentation it could be solved by reformatting the ssd. This also results a brand new file system which makes performance and user experience better than before. Failing to do so will result in the permanent removal of ALL files, 12.socklcproFormatting is a destructive process that completely wipes out everything.
Power Cycling the SSD
It becomes very handy to power cycle, in case the SSD is corrupted due to sudden shock of electric current. To perform this method:
Here, disconnect the SSD from data cable only and not the power.
Let the power stay on for about 30 minutes.
Switch off power for 30 seconds, run the device for another half an hour and plug in your data cable 25.
Idling in the Boot Menu
Occasionally, just letting the SSD sit idly in your boot menu can reset some parameters and alleviate minor symptoms. While this technique is less standard, it may simply work on certain edge cases where most other methods will fail123.
Updating SSD Firmware
Updating the firmware on an SSD can help prevent compatibility and performance issues. Manufacturers tend to release bug fixes and optimizations, so consider for an update from time to time 14.
Updating Drivers
Obsolete drivers can result in a number of operational issues on an SSD. Keeping all the drivers you have that are pertinent to this updated can ensure peak performance and compatibility with your operating system14.
Using Data Recovery Software
If data recovery needs to be done, software tools like Disk Drill or Recuva can help. These types of software are constructed to retrieve lost files from failed or damaged drives by searching for the retrievable data and then trying to restore it2,3,4.
Connecting to Another Device
Solution #12: If the Solid – State Drive is not recognized by your system try connecting it to other device or use a different port in case detection problems.
The bottom line is that, there are plenty of ways for you to address SSD damage but it is very important that you will determine the issue and use this as a basis on which approach should be taken.