Corrupted Hard Drive Won’t Boot When you see your hard drive is corrupted and stop the computer booting, such a condition requires methodical troubleshooting. In order to help you overcome the “Disk boot failure” issue on Windows, there are a couple of tips and tricks that could be tried out by yourself.
Restart and Enter BIOS
To solve this, you need to reboot your computer and then go into the BIOS settings. This is typically done by pressing a specific key like F2, F10 or DEL while powering on. Once in the BIOS:
Navigate to the Boot tab.
But before you attempt to do anything, boot from your hard disk first.
Exit BIOS and Save these changes.
Boot into the BIOS and make sure an UEFI capable hard drive is listed as your first boot option.
2. Check Physical Connections
Check all physical connectionsEnsure that you have everything plugged in correctly.
Check your hard drive’s power and data cables for damage
If all else fails, give the hard with a different port/make sure to replace it with another cable/conductivity work done.hard drive recovery (ad)
Use Windows Recovery Tools
If the above steps don’t work, you can try built-in Windows recovery tools:
Disk Utility (CHKDSK): CHKDSK scans for file system errors and attempts repairs. To run it:
As the administrative user, open Command Prompt.
This can be done by running chkdsk C: /r (replace the letter ‘C’ with your specific drive letter) and hitting Enter.
SFC (System File Checker): This will check for system file corruption Hence type sfc /scannow in Command Prompt and run the scan.
Deployment Image Servicing and Management (DISM): When SFC cannot fix the problem, DISM can do that as it is capable of repairing Windows images. Then run dism /online /cleanup-image /restorehealth.
Data Recovery Options
If your hard drive still will not boot and data recovery is a necessity:
You should try connecting the hard drive as an external drive to another working computer. This gives you access to files directly.
Recover lost files from the corrupt drive using data recovery software such as Disk Drill, or Victoria 911.
Formatting as a Last Resort
And finally, if all is lost and you need the hard drive once more a final time;
It will delete all data in the current formatting, but it might work again. To do that, you can use disk management or via cmd (format E: /fs:NTFS)
So there you have it, how to fix a corrupt hard drive not booting involves checking hardware connections and using Windows tools for recovery as solutions before starting from scratch after recovering your data. Therefore, it is important to take each one carefully in order not to perhaps further damage the data while doing so.
