By following the correct steps, fixing a broken bathtub faucet can be done in no time. This detailed guide on a drip and replacing the entire faucet.
How To Fix A Leaky Tub Faucet
Shut Off the Water Supply
Shut off the water supply before repairing a leak. So, you just want to keep the area pretty dry as no one wants surprise flooding while doing their magic!
Remove the Faucet Handle
Find the cap of the water control handle and remove it.
Turn the screw handle with a flat-blade screwdriver.
Gently pull off the handle. If it is stuck, you may need to heat the pan a little with a hair dryer if there is any corrosion in order for this pan and elbow joint can be removed.
Take Off the Escutcheon Plate
This plate goes over where the faucet meets up with the wall. Unscrew it and take if off carefully.
Extract the Stem Assembly
Detach the stem assembly from the faucet body using a bath socket wrench.
Check for any wear or damage
Check and Replace Washers
Inspect the washers of your stem assembly. Replace so much off-size ugly v tacky fasteners with others which are the same in dimension and type.
Reassemble the Faucet
Push the stem assembly back into the faucet body.
Re-attach the escutcheon plate with screws and then push back on the handle.
Step 9: Underneath the sink, connect your new faucet’s supply lines and feeds Step 10: Turn on water supplies for that side of the sink to check for leaks.
Replacing a Bathtub Faucet
Your faucet maybe too old and cannot be fixed any longer so you have to replace it. Here’s how:
Gather Necessary Tools
A wrench, screwdrivers, plumber’s tape and potentially new fittings.
Remove Old Faucet
Remove the handle and then the escutcheon plate by following similar steps to above After that turn and remove the old faucet on your wall.
Install New Faucet
Finally, put your new faucet in position.
Secure per manufacturer instructions making sure all connections are tight.
Wrap plumber’s tape on it and will stop the leak.bathtub faucet repair (ad)
Test Your Work
After everything has been put back together, turn the water supply on and check for leaks. Adjust as needed.
After following the above troubleshooting steps, you will surely be able to get your bathtub faucet fixed or replaced in working form and prevent it from dripping leaking hung.