The thing here is what to do when CD player is stuck, right! How to Fix a Stuck CD Player If your CD player has failed you can try these few troubleshooting steps. So, in this post, I am going to guide you step by step about how you can unlock your CD player; part by part.
Common Reasons for a Stuck CD Player
Power: The electronic component may just need a reboot. Sometimes, it can be fixed by simply unplugging the device for a while.
The tray may fail to open due to mechanical failures such as a worn out drive belt, or misalignment.
Blockage: The tray may be blocked by things like items or discs that are stuck inside the player.
Step-by-Step Troubleshooting
Reset the Device:
Simultaneously press and hold the eject button and the stop button.
Continue holding these buttons down and plug the power cord back into the outlet. By doing this, the device gets reset and releases the tray when it’s in security mode.
Manual Eject:
In case above method fail, there is usually a small emergency eject hole by the side of eject button. The small hole is a physical pop-out tray release and if you insert something like an unfolded paperclip or SIM popping tool it will push the plastic tab in and cause the mechanism to eject.
Check for Obstructions:
Check visible obstructions in the tray area.CD Player Repair (ad) Make sure that the process is not being blocked.
Check and replace Drive Belt
And also, if you whole-heartedly believe that the drive belt is just a little bit tired then man up and very carefully take apart the CD player to reach it. If it looks worn out or damaged, replace it with a proper rubber O-ring from any genuine hardware store
Preventive Measures
Clean your CD player quickly and make sure that debris will not be able to gather in the area around the tray.
Do not try to force the tray closed or open as you might cause even more mechanical problems to it.
Thanks to them, you should be able to diagnose and possibly repair your old CD player on your own without having to spend a cent on professional repairs.
