Card Reader: How to Fix a Broken One
There are many ways on how you could repair a card reader, from troubleshooting it to physically repairing what was damaged then as well preventive measures.
Troubleshooting Steps
Secure Connections: Make sure that the card reader is correctly hooked up to your device.SD Card Repair (ad) A poor connection sometimes causes recognition problems.
Test alternative ports: If you are using a USB card reader, try connecting your device through another USB port / computer to make sure there is no problem with the specific one1.
We recommend you: Use Command Prompt — In case of the corrupted SD card, running CHKDSK will be helpful to identify & repair file system errors. Execute Command Prompt as an administrator after which run a chkdsk X: /f (X = drive letter of your card)1.
Physical Repairs
Look for Damage: Examine the card reader and SD slot, is there a visible damage@implementation Connections are frequently blocked by dust or other debris2.
Contact Cleaner: Gently wipe the contacts on both your sd card & reader using anfg tissues simmilar to isopropyl alcohol full. Power the device off before cleaning.
Replace Components: If the damage to your SD card slot is internal, you may be able replace it or if you have feel handy do a DIY conversion of an automatic spring loaded slot into manual sliding configuration4.
Preventive Measures
Apply with precision: To avoid damage, do not insert the cards obliquely; actually you should place them in correct position before insertion.
Standard maintenance: Refresh the Card reader and remember to clean out any dust build-up over time as not impact its performance.
Invest in Good Gear: Spend a few extra bucks to thereafter, on quality SD cards and readers that are less likely to breaktheycarefully = manufacture — Damage due moo?【 I!
This way, you should be able to troubleshoot and fix the bugged card reader without sending it in for repairs as well as take steps to avoid any issues down the line.