Repairing Your Recessed Light Hole and Spring Clip Fixing a recessed light hole problem, or tightening up that slack spring clip are all possible for the handy do-it-yourselfer. Here is an in-detail troubleshooting guide for them.
Fixing a Recessed Light Hole
Assess the Damage:
Measure the size of hole for the recessed light. If it is not a bit too big, you will need to patch it.
Prepare the Area:
Clear away loose debris from the outside of hole Feel free to slice off parts of plaster or drywall which are left behind anywhere they may be at an angle.
Patching the Hole:
Repair with Drywall: Cut a piece of drywall to precisely match the hole. If the hole is large you may have to screw a piece of 1×3 strapping across the opening first as backing for attaching this drywall.
Using Compound: Fill the gaps with all-purpose joint compound. Use multiple thin coats rather than a single thick coat of paint and allow to air dry between coats. Sand between layers for a smooth finish.12
Finishing Touches:
After the patch is completely dry and sanded smooth, paint to match your ceiling. It will make hiding all of those imperfections easier.
How to fix a loose recessed light spring clip
Identify the Problem:
One loose or missing spring clip can make the fixture hang lopsided.
Fixing Loose Clips:
Push a flat-blade screwdriver into the small slot on clip Use a screwdriver to push gently up on both the lever and clip, reattaching the latter in its position3
Replacing Missing Clips:
If there is a missing clip or the clip has been bent out of shape, you can remove and replace it easily by sliding a new one into the slot along that recessed fixture wall. Use a Screwdriver & Press it down in place4.recessed light repair (ad)
Final Check:
Align the clips properly, and double-check to make absolutely sure that all of them are fastened as per standard procedure.
By these steps, you will be able to repair the recessed light bulkhead holes and the problems in spring clips for making your lighting system elegant as well as operable.
