Programming A 2000 Nissan Maxima Key Fob In Order To program your key fob for a 2000 nissan maxima you will need to follow these steps exactly to make it successful.
How to Program a Key Fob Step by Step
Prepare the Vehicle:
Let all doors be closed and locked by Driver’s Side Power Lock/Unlock Switch
Enter Programming Mode:
Put the key in ignition and pull it out for six times within 10 seconds without twisting. This process will cause the flashers to blink twice, alerting you that it has entered programming mode.
Insert the Key:
Reinstall the key into the ignition after entering programming mode.
Program the First Remote:
Within ten seconds of entering programming mode, hit any button on the remote. Turn on the hazard lights again to signal programming is complete.
Program Additional Remotes:
If you need to program more remotes, press a button on every other remote within 10 seconds of the previous confirmation flash.
Exit Programming Mode:
When you are done programming key, turn ignition to the “OFF” position and remove the key. The hazard lights will flash two more times to indicate that you have left programming mode.
Test the Remotes:
If locking and unlocking the doors or any other function does not work, you probably have programmed a weak battery in your key which will prevent this remote from proper operating.
Troubleshooting Tips
If after doing this the remotes are not functioning, check for interference or if it requires to change battery of the key fob.
Make sure you are doing the steps quickly and carefully to avoid errors in programming.
Follow these instructions to program your Nissan Maxima key fob quickly and make it easier for you to access your vehicle.
