Can You Refinish Partial Hardwood Floors : What To Consider The answer is yes, you can recoat some wood floors but the issue does have specifics to address. Noticeable Blemishes: Should you refinish only specific boards, these areas may be shinier or have a different color than the surrounding sections. Most notably between the time when a new finish wears down, and becomes better integrated with an older one. In time, as the newly finished boards get scuffed and worn they will probably blend in better with rest of the floor12.
Preparation Steps 1) Before you start working, take a look at the condition of your floor. If wear is visible only on the top coat, you can burnish and reseal within those areas rather than a complete resurface.hardwood floor refinishing (ad) In some cases, such as deeper scratches or those that penetrate the wood itself you may need to sand down to bare wood3. To create a seamless transition between old and new finishes2 sand lightly around the perimeter of what is being refinished (this ensures that this area can be buffed uniformly).
Apply the New Finish to all of the section that includes both worn and unworn areas Then it will have a more uniform sheen. After that just apply 2-3 coats with proper drying time between and a light buffing in the middle of each coat. However, testing a small area with it can help in determining how well the new finish matches perfectly to your existing floor13.
In the end, although it is time and cost effective a partial refinishing has to be done right in order not leave seams visually detectable.