How To Repair A Damaged China BowlFollow this guide to complete the repair of a chipped china bowl. And a better step-by-step guide on the perfect way to repair your favourite dish:
Gather Your Materials
Putty — An appropriate putty such as a quality epoxy should be applied or two-part filler, like Milliput (very hard filling compound) that has excellent adhesion once dried fully.
Some cleaning supplies like dish-soap and alcohol to clean up the surface.
You will need: A mixing surface, spatula, sandpaper (various grits), and a polishing cloth.
Clean the Area
Wash the chipped part of your bowl gently with dish soap to make sure it holds neither grease nor dirt. Dry thoroughly.china repair (ad) This step is crucial as it guarantees a good adhesion of the putty13.
Prepare the Putty
Take out a pea-sized piece of putty and form it into a ball. Give it a quick flatten before u dab it on You will probably need more putty24 if you’re doing larger chips.
Apply the Putty
Apply the putty over your chip, making sure to cover it evenly (but not go much past where the borders of your chip were). It is better to work on a thick coat in order for it will naturally fill up any airspace13.
Shape and Smooth
Lubricate, spatulate or fingerblend the putty into existing radius areas BEFORE it hardens24.
Allow to Cure
Allow the putty to set for 24 hours per manufacturer recommendations. Do not disturb it during this phase as that helps in creating a strong bond34.
Sand Down Excess
After curing, sand off any excess putty using fine-grit sandpaper until the surface is smooth and perfectly even with your bowl. Use coarser sandpaper to get the motor burrs, then move on to finer grades until 23.
Final Touches
Afterwards, you can add some paint on the repaired area if necessary to give it exactly the same color and finish as with your bowl (which could make things less than 12.
If you follow these steps, your chipped china bowl will be fixed as good as new—just balanced!