Transmission cooler lines are important parts of any vehicle cooling system, as they let fluid cool and regulate the flow in a transmission. With time, these lines lose their capabilities and spring leaks that attract performance of an automobile. Transmission Cooler Line ReplacementFortunately, replacing your transmission cooler lines is a job that many do-it-yourselfers can tackle themselves.
Transmission Cooler Lines Explained
The transmission cooler lines carry the fluid between the trans- mission and its cooler. If these lines develop a leak or break open fluid can be lost which results in overheating and ultimately burning up the transmission.
Signs of Damage
Leaking Fluids: Check for pools of transmission fluid underneath your car.
Overheating: An overheated transmission is another problem that might mean an issue with the cooler lines.
If you have to top up transmission fluid multiple times in a short period of time, your car could be leaking.
DIY Repair Options
Compression Fittings
Compression fittings are some of the best ways you can fix punctured lines.transmission repair (ad) This means cutting out the affected area, and attaching new lengths of pipe to each end using compression joints. This technique is strong and it can handle traces of increased pressure.
Hose Clamps
If you notice leaks, rubber hoses and hose clamps can provide a temporary stop gap until the leak is properly fixed. While not as dependable in the long term, this hack will do until a more robust method is added.
Steel Line Replacement
A steel line is suggested as a repair for more long-term. This will make it so you no longer have to worry about future leaks, and they provide more durability than rubber hoses.
Repairing Transmission Cooler Lines Step By Step
Find the Source of Damage: Identify exactly at what point it is leaking and fix other leakage points as needed.
Gather Tools and Parts: You should have pipe cutters, wrenches or compression sleeve pullers (depending on application), new fittings/hoses, sealing compound/teflon tape.
Remove the Damaged Section: To remove a damaged section of line, cut it out with a pipe cutter.
Put in Compression Fittings or New Line: Use a new line segment for installation, and you can use compression fittings to consolidate with the old one.
Check for Leaks: After installation, start your engine and look under the automobile to see if anything is dripping.
Fixing transmission cooler lines can be easy to do and will save you time, money and inconvenience when your vehicle operates properly. Future article on fixing problems of transmission cooler system follows these steps.