apple watch pairing (ad)io/wp-content/uploads/0c5206302972d0c8cf24358a66b8e5641.png”>
Manual pairing frustration Why your Apple Watch won’t pair at all So here are few things through which you can fix this problem.
Typical Pairing Problems
Stay close and remove barriers. Make sure your Apple Watch is within range of its paired iPhone A Bluetooth pairing Failure can occur when the (BLE) signal is blocked by such objects as bags or furniture. 1
Settings Check: All devices need Wi-Fi and Bluetooth turned on. But bear in mind either devices one of them on Airplane mode, it won’t connect. Perfect, you can check the same from control center on your iphone or apple watch35.
Restart Device: Many times restarting each device can quickly solve any brief interferences that were getting in the way of connecting. This tried and true tip solves a number of tech issues14.
Troubleshooting Steps
Device Setting Verification: Make sure that Bluetooth and Wi-Fi are enabled on your iPhone as well as the Airplane mode is turned off in both devices23.
Restart Devices: Turn off both your Apple Watch and iPhone, then turn them back on. It can reactivate their connection14.
By Reset Network Settings : If you still facing the issue then go with network setting reset on your iPhone. aaaaa -will remove all saved wifi networks and passwords3 but might help with larger connectivity problems
Unpair and Re-pair if nothing works- If still you not able to pair your Apple watch then unpair it from the iPhone settings as a new device
This may be too complicated, so it’s best to Contact Support if none of the above worked before.
If you follow all of these steps, manually pairing your Apple Watch to iPhone not working should be fiexed
